AV
Conventional-wall automotive cable
AV is the standard-wall PVC insulated automotive cable to JASO D 611 / JIS C 3406. The thicker insulation wall gives generous abrasion and cut-through…
- JASO D 611
- JIS C 3406
Catalogue
Products
31 standard product lines across 4 ranges. Every line is built to a named standard or to your drawing — custom constructions, compounds and lengths are routine.
Wires & Cables
A complete range of low-voltage wires and cables built on electrolytic-grade bare and tinned copper conductors, with insulation systems selected for the electrical, thermal and mechanical stresses of each application.
Automotive Cables
Single-core low-voltage cables for vehicle wiring, produced in JASO, JIS, DIN and ISO constructions with wall thicknesses matched to harness weight and routing targets.
AVS
Thin-wall automotive cable
AVS carries the same conductor as AV with a reduced insulation wall, cutting overall diameter and harness weight without giving up the electrical rati…
- JASO D 611
- JIS C 3406
AVSS
Ultra thin-wall automotive cable
AVSS takes the thin-wall concept to its practical limit, with the smallest outer diameter of the JASO family. It is specified where weight reduction a…
- JASO D 611
DIN
Metric FLRY / FLRYY constructions
DIN-type automotive cable in FLRY and FLRYY constructions to ISO 6722 and DIN 72551, supplied in metric conductor sizes for European vehicle platforms…
- ISO 6722
- DIN 72551
Travelling / Elevator Cables
Flat and round travelling cables engineered for continuous flexing in lift shafts, with strain-bearing members that carry the suspended weight so the conductors never do.
Flat Travelling Cables
Power and control for lift cars
Flat elevator travelling cables carry power and control circuits between the shaft and the moving car. The flat profile suppresses twisting, and texti…
- IEC 60227-6
- IEC 60332-1
Data Transmission Cables
Screened pairs for lift signalling
Travelling cables with screened twisted pairs alongside the power cores, so intercom, display, serial bus and control signalling ride the same run as…
- IEC 60227-6
Data / IP Camera Cables
Composite power plus video
Composite travelling cables that combine camera supply cores with screened data or coaxial elements, letting a single run feed IP and analogue surveil…
- IEC 60227-6
- IEC 60332-1
CAT-6 Travelling Cables
Gigabit Ethernet that flexes
Flat travelling cables with an integrated CAT-6 four-pair element, rated for continuous flexing. They bring gigabit Ethernet to the lift car for displ…
- ISO/IEC 11801 Cat 6
- IEC 60227-6
Submersible Cable
Flat cable for borewell pump motors
Flat three-core submersible pump cable built for permanent immersion. The insulation and sheath compounds are selected for water resistance and dimens…
- IS 694
- IS 7098
Instrumentation Cables
Screened pairs and triads for process signals
Instrumentation cables for 4-20 mA loops, RTD, thermocouple and fieldbus signalling, available with individual screens, overall screen or both, and wi…
- BS 5308
- IS 1554 Part 1
Solar Cables
DC cable for rooftop and utility scale PV
Halogen-free, cross-linked DC cable for photovoltaic strings and combiner runs. The XLPO insulation and sheath are rated for a 25-year design life und…
- EN 50618 (H1Z2Z2-K)
- IEC 62930
- TUV 2 PfG 1169
Data Center Cables
Low-smoke power and data for white space
Power and data cables specified for data centre white space and plant rooms, with low-smoke zero-halogen compounds that limit smoke and corrosive gas…
- IEC 60332-3
- IEC 61034
- IEC 60754
Domestic Cables
House wiring cable for residential and commercial building circuits, drawn and insulated to IS 694 with FR and FRLS compound options.
Industrial Cables
Flexible single and multicore cables for machine building, panel wiring and plant distribution, made to take vibration, oil and repeated movement.
Flexible Wires
Single-core flexible copper wire
Single-core flexible wire with fine-stranded class 5 copper for panel wiring, appliance internals and equipment builds where the conductor has to be r…
- IS 694
Multicore Flexible Wires
Sheathed 2 to 5 core flexible cable
Round sheathed flexible cables in two to five cores for portable equipment, machinery supply and appliance cordage. The extruded inner filler keeps th…
- IS 694
- IEC 60227
Multicore Industrial Cables
High core count control cable
Multicore control cables in high core counts for plant control, interlocks and signalling. Cores are numbered and laid up in concentric layers, with s…
- IS 1554 Part 1
- IEC 60502-1
Enamelled Wire
Enamelled winding wire in copper and aluminium, insulated with modified polyester, polyesterimide and polyamide-imide films. Thermal class, film build and conductor tolerance are matched to the slot fill and the temperature the winding actually sees in service.
Copper Enamelled Wire
Magnet wire for high slot fill
Enamelled copper winding wire drawn from electrolytic-grade rod and coated in multiple passes for an even film. Its conductivity gives the highest out…
- IEC 60317
- IS 13730
- NEMA MW 1000
Aluminium Enamelled Wire
Lighter windings at lower cost
Enamelled aluminium winding wire on EC-grade conductor, for windings where weight and material cost matter more than absolute slot efficiency. Sized u…
- IEC 60317
- IS 13730
- NEMA MW 1000
Power Cords
Moulded and assembled cordsets built to the plug standards of the markets you ship to, with matched cable and end connectors so the finished assembly carries one coherent approval story.
Indian Plugs
IS 1293 two and three pin cordsets
Moulded Indian-standard plugs in 6 A and 16 A ratings, two and three pin, supplied as complete cordsets with the flexible cable of your choice. Pin ge…
- IS 1293
European Plugs
CEE 7 Schuko and Europlug cordsets
European cordsets in CEE 7/7 Schuko and CEE 7/16 Europlug formats, moulded onto H03VV-F and H05VV-F cable to match the appliance class and current dra…
- CEE 7
- IEC 60884-1
UK Plugs
BS 1363 fused cordsets
BS 1363 three-pin cordsets with an integral fuse carrier, fitted with 3 A, 5 A or 13 A fuses to suit the appliance load. Built for the UK, Ireland and…
- BS 1363
- BS 1362
Australian Plugs
AS/NZS 3112 cordsets
Flat-pin cordsets to AS/NZS 3112 for the Australian and New Zealand markets, in earthed and unearthed formats with insulated pin shrouds as required b…
- AS/NZS 3112
African Plugs
SANS 164 and BS 546 cordsets
Cordsets for African markets in SANS 164 and round-pin BS 546 formats, covering both the legacy 15 A South African plug and the newer compact SANS 164…
- SANS 164
- BS 546
American / Japanese Plugs
NEMA and JIS cordsets
NEMA 1-15P and 5-15P cordsets for North America, and JIS C 8303 cordsets for Japan, built on SPT, SVT and SJT cable to match the appliance class and c…
- NEMA WD-6
- UL 817
- JIS C 8303
IEC End Connectors
C13, C19 and appliance couplers
IEC 60320 appliance couplers moulded to the far end of a cordset, covering the hot and cold condition connectors most equipment uses: C5, C7, C13, C15…
- IEC 60320
M12 Connectors
Sealed circular connectors for the factory floor
Overmoulded M12 circular connector leads for sensors, actuators and industrial Ethernet. A-coded for signal and power, D- and X-coded for Ethernet, al…
- IEC 61076-2-101
Customised Plugs
Tooling and overmoulds to your drawing
Purpose-built plug and connector overmoulds developed against your drawing: custom body geometry, colours, branding, cable exits and lead lengths, tak…
- Per target market
Terminals & Cable Holders
Termination and retention hardware
Crimp terminals, ferrules, cord grips and cable holders that finish an assembly: ring, fork, bullet and blade terminals in insulated and uninsulated f…
- DIN 46228
- IEC 60352-2
Spiral Retractile Cords
Coiled cords that return to length
Heat-set spiral cords that extend under load and pull back to their retracted length. Coil diameter, pitch, retracted and extended lengths and tail le…
- IEC 60227
- IEC 60245
Wire Harnesses
Complete harness assembly to your drawing and bill of materials, from prototype through to series supply, with continuity and hipot testing on every assembly before it leaves the floor.
Need a construction that is not listed?
Most of what we ship is built to a customer drawing. Send the specification and we will confirm the construction, compound and approvals in writing.